The URL can be used to link to this page

Home My WebLink AboutLD24-0075Permit Number: LD24-0075 LD - Utilities/ Utility Maintenance Issued: 01/08/2024 Expired: 07/09/2024 Job Address: Red Hawk Pkwy S/S 20' W/O El Chimisal Rd Legal Description: City of Temecula - Land Development Division 41000 Main Street - Temecula, CA 92590 Mailing Address: P.O. Box 9033 Temecula, CA 92589-9033 Phone: (951) 308-6395 Fax: (951) 694-6475 Southern California Edison 298 Kansas Street Redlands, CA 92373 (909) 307-6884 Applicant: Ferreira Construction Co., Inc. 10370 Commerce Center Drive, B-200 Rancho Cucamonga, CA 91730 (909) 606-5900 Contractor: Utility Work Order Number: 904224615 Description: SCE 904224615-200: Red Hawk Pkwy S/S 20' W/O El Chimisal Rd WORK HOURS SHALL BE MONDAY – FRIDAY, NO HOLIDAYS, 8:30am - 3:30pm Proposed work: Lid/frame replacement Permitee Date City Engineer or Authorized Representative Date 01/08/2024 Page 1 of 1 UCC #: 904224615-200 / TS D: 88/ SH AGMT: C-3315 WO #: 904224615 DIMP due date: 02/01/24 DIMP 1 Michelle Y Ramirez From:Environmental Requirements Sent:Thursday, December 7, 2023 1:09 PM To:Greg Cagle Cc:Environmental Requirements; UG Civil Mailbox San Jacinto Region; Scott Hyde; Kenneth Hansen; Sarah Stark Subject:eERD Environmental Standard Measures: O&M Environmental Requirements: San Jacinto 904224617 structure 5627994, 904224615 structure 5457300, 904224616 structure 5647684, and 904224614 structure 5344003 No Date Provided Attachments:5627994 - 412637328.pdf; 5457300 - 412940689.pdf; 5647684 - 413231994.pdf; 5344003 - 413235315.pdf Greg, Thank you for your request. The following work will not require environmental support for: SAP# Structure Scope of work 904224617 5627994 PME plate cover installation 904224615 5457300 Lid/frame replacement 904224616 5647684 HH replacement 904224614 5344003 HH replacement Please have the crew follow the environmental standard measures listed below. Please contact (833)SCE-2ENC for any change in the scope of work or if you have any additional questions or concerns. The following Environmental Standard Measures must be available on-site at all times and be read and understood by the crew before work commences. You may proceed with the following environmental requirements: Tailboard Briefing: The Environmental Requirements must be kept on site and be read to the crew prior to starting work. If any of the requirements create a safety or scope concern, please contact Environmental Services. If additional ground disturbing or vegetation clearing activities are proposed during project activities, stop work and contact Environmental Services. No Overland Travel or Cutting Paths: Stay on existing paved or maintained dirt roads (two-tracks routes are overland travel and not approved under this measure). No trimming or removal of vegetation to create new or widen existing foot paths can occur. Over land routes must be approved by SCE Environmental Services prior to work. No Vegetation Impacts: No vegetation/tree removal or trimming/mowing/brushing may occur. If there is a change in scope, contact Environmental Services. Scope of Work Authorization: The following ERD conditions apply to the work outlined in the Scope of Work provided to ESD. Any changes or additions, including but not limited to construction means and methods, equipment identified, materials used, extent of grading, scope of vegetation impacting activities, add-ons, or proposed access routes, must be reviewed and released by SCE Environmental prior to the start of work. Minimize work area: The work area shall be minimized to the smallest area necessary to complete the work. Crew Check: Prior to starting work, crews will check the workspace for bird nests (e.g., pole cavities, vegetation to be removed). Contact the biological monitor or call the number above prior to work within 200 feet of an active nest. 2 Cavity Nests: Prior to starting work, crews will check the workspace for cavities in poles and trees. Crew s will tap loudly on poles and trees with potential cavity nests and watch for wildlife leaving the cavity or the sounds of young birds inside the cavity. If an active cavity nest is suspected, crew must STOP WORK and contact SCE Environmental Services prior to work. Injured/Trapped Wildlife: Prior to the start of work, crews will inspect their workspace for any injured or dead wildlife. In addition, look in holes and trenches, construction material, and equipment for any trapped wildlife. Call the number above if you observed dead, injured, or trapped wildlife. Spill Release/Prevention: Vehicles/equipment must be inspected for leaks (e.g., fuel, oil, hydraulic fluids, etc.) and repaired prior to work. Storing, fueling, and maintenance shall not occur locations where spilled materials could potentially enter a wetland, waterway, or riparian area. Spill kits/absorbent clean-up materials shall be available on-site and if used, disposed of properly. All releases to the environment must be reported to your SCE Representative and 844-GOT-SPIL (844-468-7745). Avoid Waters and Wetlands: No work is allowed within waters or riparian vegetation unless there are Site-Specific Environmental Requirements authorizing such work and all necessary permits have been issued. If wetlands, waters, and riparian vegetation are encountered with no Site-Specific Environmental Requirements – STOP WORK and contact SCE Environmental Services.  Driving on road through waters (wet or dry): Only rubber wheeled vehicles and equipment are allowed to travel through drivable water crossings on existing access roads. No grading or road improvements/repairs/alterations (e.g., damming, diversions, fill, placement of plates or boards, etc.) are allowed within these areas unless reviewed and released by SCE Environmental. No sto pping within flowing or standing water. Crews shall avoid water crossings when soils are too wet/muddy to support the vehicle without creating ruts or causing the vehicle to become stuck. Unanticipated groundwater: For ground disturbance work, if unanticipated groundwater is encountered, STOP WORK and contact SCE Environmental. Archaeological/Human Remains/Paleontological Discoveries: If Archaeological resources (Native American or historical artifacts), fossils, or human remains are encountered, STOP WORK, and call 833-SCE-2ENC and ask for an on-call Archaeologist. Site re-contouring: Upon project completion, all disturbed areas must be returned to meet pre-existing contours (i.e., original line and grade). Weed Maintenance and Prevention: Use certified weed-free materials (e.g., gravel, straw, and fill) to the extent practicable. Maintain facilities and infrastructure to limit the introduction and spread of weeds. Dust Control: No visible dust plumes are allowed. If dust plumes are observed, then slow speeds on dirt roads, water dirt/work areas, or work when the soil is not extremely dry. Generator Usage: Generators are not allowed unless a Generator Ordering Form (GOF) has been completed 20 days prior to work. Contact Transportation Services Department (951) 440-8370 to verify if a form has been received; if no form has been submitted, contact the SCE representative to complete this form immediately. From: Greg Cagle <Greg.Cagle@sce.com> Sent: Thursday, December 7, 2023 10:23 AM To: UG Civil Mailbox San Jacinto Region <UGCivilMailboxSanJacintoRegion@sce.com > Cc: Greg Cagle <Greg.Cagle@sce.com>; Scott Hyde <Scott.Hyde@sce.com>; Kenneth Hansen <Kenneth.Hansen@sce.com>; Environmental Requirements <EnvironmentalRequirements@sce.com>; Sarah Stark <sarah.p.stark@sce.com> Subject: 88 - Civil Request for DIMP We are requesting civil for the following DIMP notification: 3 1. 412637328 - UG-5627994 2. 412940689 – UG-5457300 3. 413231994 – UG-5647684 4. 413235315 – UG-5344003 See attached notifications. Environmental, please provide civil with clearance for this job. Sarah P. Stark Performance & Resource Analyst Wildomar Service Center Southern California Edison Sarah.P.Stark@sce.com O: 951.249.8442 | C: 951.397.1326