HomeMy WebLinkAbout#009 Old Adobe PlazaSCOPE OF SIGNS
EXHIBIT "0"
OLD ADOBE PLAZA
SIGN CRITERIA
SIGN TYPE A Signs shall be comprised of internally illuminated channel letters as per attached
criteria. Each Shop Tenant will be required to have one such sign, meeting the following
specifications:
24 guage stretcher leveled paint LOC Sheet Steel custom fabricated with 5" metal returns.
Letter edge to have Rustoleum primer base with #313 E Dark Bronze Enamel Paint Finish.
Letter interior to have Rustoleum White Reflective Paint Finish.
Interior illumination to be 60 Milliamp single tube neon gas system operating on France or
Jefferson High Power Factor Transformers.
Letter face to be 3/16" Rohm Haas or equal acrylic plastic with bronze trim cap.
All crossovers and wiring to be contained in a raceway behind facia.
All connections between letters and raceway to be made with threaded conduit.
{SIGN TYPE g Single faced plexiglas sign on rear of store, optional. Nonilluminated signs
will be 3/16" Rohm Haas or equal acrylic plastic with bronze trim cap on 3/4" marine grade
plywood letters.
Illuminated signs will meet the criteria for Sign Type A. Illuminated signs will be optional.
Total sign area for each Tenant space is as follows:
SIGN A 1 minimuv IB" ,asimum letter height, not to exceed SO of store
frontage in length.
'SIGN B 12" maximum letter height, not to exceed 70% of store frontage in length. J
1. All sign designs, letter styles, color, size, etc., must be approved by the Landlord or the
Landlord's designated agent for the Shopping Center. Performance shall be strictly enforced
and any non conforming signs shall be removed by the Tenant or his sign contractor, at their
expense.
2. Prior to applying for any Governmental Permits, each Tenant shall submit to the Landlord,
for approval, through the sign contractor, two (2) copies of a detailed drawing of his pro—
posed signs, signed by Tenant indicating conformance with these criteria.
3. The Tenant shall pay for all signs and their installation, maintenance, permits and electricity.
4. Landlord reserves the right to reject any work determined to be of lesser quality by Landlord
or project architect.
5. All signs and their installation must comply with all local building and electrical codes.
No flashing or animation of signs will be permitted. No exposed electrical tubing or
"crossovers" will be permitted. No projections above or below the "signable area" will
be permitted. Sign size, materials and location are per Landlord's specifications.
6 is the responsibility of the sign company to verify all conduit and transformer locations
and service prior to fabrication.
7. All signs must be installed prior to the date Tenant opens for business. Installation of
all signs shall comply with the attached drawings and specifications. Placement of all signs
shall be centered upon the building facade in relation to the store frontage.
EXCEPTIONS: Any exceptions to these standards must be reviewed by Landlord prior to fabrication
of any signs.
INITIAL
N i 11 AL
S
1
1
n
0
a
3
ra
ra
A
tt PM CO
1058. O
occ
Ptis
NN
4
weRv*Jo CR
n
n
I alma
Mala
1